Tractors in a field

Leading Edge Equipment offers a variety of service packages to meet the needs of your farming operation. Whether you’re preparing for planting, spraying or harvest, we'll make sure your equipment is running at peak performance. Sign up now to take advantage of this year's specials!

  • FREE TRAVEL to farm for inspections.
  • FREE HAULING for work performed November 15, 2021-March 31, 2022.
  • Ask us about our WASH PROMOTION on combine and tractor inspections!
  • 1 year PARTS WARRANTY on dealer-installed parts (6 months on customer installed).
  • Great FINANCING OFFERS available now!
View our Service Specials in PDF format

HARVEST

Combine inspection: $399

  • 91-point inspection
  • Clear all stored codes
  • Update machine and controller software
  • Oil scan
  • On farm or at dealership (free travel to farm for inspection)

Header inspection

Platform Inspection: $175
Draper Inspection: $200
Corn Head Inspection: $30 per row non-chopping, $60 per row chopping 
  • Inspect sickle bars and knives
  • Run and inspect head
  • Inspect all bearings and bushings
  • Check all chains
  • Inspect and run auger/conveyor 
  • On farm or at dealership (free travel to farm for inspection)

Crop changeover: $525

  • Change concaves
  • Change machine settings
  • Calibrate auto header height
 


 

PLANTING

Tractor inspection: $350 for row crop, $399 for 4WD

  • 126-point inspection
  • Clear all stored codes
  • Update software
  • Oil scan
  • On farm or at dealership (free travel to farm for inspection)

Planter inspection: $15 per row

  • Perform inspection of:
    • Openers and seed tubes
    • Closing wheels and bearings
    • Parallel arm bushings
    • Gauge wheels and bearings
    • Frame
    • Wiring, chains and drives
    • Fertilizer system
    • Monitor operation and all safety points
  • Update software
  • On farm or at dealership (free travel to farm for inspection)

Air seeder and Commodity Cart Inspection: $350

  • Perform inspection of:
    • Seed boots and disks
    • Gauge wheels and bearings
    • Closing wheels and bearings
    • Press wheels and bearings
    • Auger/conveyor
    • Meter housings and meter rollers
    • Blockage system and monitor
    • Monitor operation and all safety points
  • Update software
  • On farm or at dealership (free travel to farm for inspection)

Air Drill / Planter Optimization with Field Start Up: $495

  • Hook tractor to planter or air drill at farm (hydraulics and electronics)
  • Level hitch, set depth to customer preference
  • Review in-cab controls and monitor with customer
  • Pass-to-pass guidance accuracy performed in-field
  • Receiver calibration
  • Update Display and receiver software as needed
  • Section Control parameters set for on/off times
  • Configure seed monitor homepages on GS2/GS3 Displays
  • Ensure systems are set
  • Update controller software
  • Variable rate parameters set
  • Active down force parameters set
  • Hook up generator if equipped with 5E

planter meter unit testing

$30 per unit vacuum
$35 per unit finger

Meter Inspection: $250

  • Disassemble segments, bearings and brushes
  • Inspect and reassemble
 

SPRAYERS

sprayer inspection: $350

  • 213-point inspection
  • Update software
  • Oil scan
  • Test hydraulics and hydro pressures
  • On farm or at dealership
  • Free travel to farm for inspection

Sprayer winterization: $350

  • Rinse machine completely with tank cleaner
  • Flush and rinse boom and plumbing
  • Disassemble key components for clean out
  • Refill system with John Deere winterization fluids
  • Fluids not included

Sprayer Combo Special: $650

$50 SAVINGS when you purchase a Sprayer Inspection and Sprayer Winterization!


Parts and any needed repairs not included. Prices may change. Other exclusions apply. Contact the Leading Edge Equipment Service department for details.
 
View our Service Specials in PDF format
LE_brand-john-deere
LE_brand-brandt
LE_brand-summers
LE_brand-brent
LE_brand-degelman
LE_brand-unverferth